Pyramid Skeleton Clock by John Pace, c.1855
Pyramid Skeleton Clock by John Pace, c.1855
Pyramid Skeleton Clock by John Pace, c.1855
Pyramid Skeleton Clock by John Pace, c.1855
Pyramid Skeleton Clock by John Pace, c.1855
Pyramid Skeleton Clock by John Pace, c.1855

Pyramid Skeleton Clock by John Pace, c.1855

c. 1855 Bury St Edmunds

Offered by Carlton Clocks Ltd.

£8,250 gbp
Request Information Call Dealer
Favourite Item
A rare and unusual pyramidical brass skeleton timepiece of long duration by John Pace, Bury St. Edmunds, No. 253, circa 1855. This very clock is illustrated in Derek Roberts' Skeleton Clocks, Britain 1800-1914.

At the 1851 Great Exhibition, Pace exhibited a virtually identical skeleton timepiece of three-month duration. An excerpt from the catalogue reads as follows:

PACE, J., Bury St. Edmunds - Inventor, Designer and Manufacturer.
Pyramidical skeleton timepiece, which goes three month. The dial is placed at the bottom of the clock to show the motion of all the wheels; the Graham's dead beat escapement, and the hands moved by a simple mechanism.

The substantial cast brass plates that make up the frame have chamfered edges, and are raised on scrolled feet, mounted on a tapered brass plinth signed 'John Pace BURY St. EDMUNDS No. 253'. This is turn is raised on a velvet plinth and rosewood base, protected under a glass dome.

The long-duration movement is going barrel. All the literature indicates that this has a three-month duration movement. Certainly we have not found the need to wind it up again after its initial wind, but we have not yet owned it for three months either. Above the barrel rises a flight of three wheels to the escape wheel, each of five or six crossings, and above this the delicate Graham's deadbeat escapement and inset jewelled pallets. These clocks are not all identical - most we know do not have jewelled pallets. This is surmounted by an arched bridge with a knurled screw adjustment to the spring suspension for fine regulation of the timekeeping. The steel rod pendulum features a most unusual halberd-shaped brass  bob. Behind the frame is a simple pulley system, linking the centre wheel to drive the minute hand by a fine thread.

The fretted and engine-turned gilt dial has Arabic numerals and blued steel spade hands.
In excellent original condition, the movement to be overhauled and guaranteed for 3 years.
John Pace (d. 1867) is recorded in various local trade directories as working in Bury St. Edmunds between 1804 and 1857. Between 1823 and 1855 his workshop was at (19) Abbeygate Street. He was a deeply religious man who was a member of the Quakers. He had a fine reputation for the skeleton clocks that he made in very close collaboration with Benjamin Parker.
Dimensions
Height 43.00 cm (16.93 inches)
Width 22.00 cm (8.66 inches)
Depth 13.00 cm (5.12 inches)
Stock Code
Pace253
Carlton Clocks Ltd.

Carlton Clocks Ltd.
Chalfont Station Road
Little Chalfont
Buckinghamshire
HP7 9PN

Contact Details
+44 (0)1494 763793
-
-
-
Email Dealer More Contact Details
Opening Hours
Contacts
View Dealer Location
Member Since 2010
Members of
View Full Details